Category: Geometry

Article

October 28, 2021

Plane Geometry

Polygons

0. Infinite (Infinite) Circle u lidung (National: Circle) 1. Infinite (Infinite) bagis-bagis (Pambansa: Linya) 2. Infinite (Infinite) parihu nga bagis (Pambansa: Pareho) 3. Triangle u three corners converging roughly; sadukay u a dukay (Triangle) (Pambansa: Talsulok) 4. Kuwadradu u atat ka suruk (Square) Dasag (Pambansa: Parisukat) (Rectangle) Kinaban (Pambansa: Parihaba) (Trapezoid) Tawi (Pambansa: Paritangi) 5. Pintadu u lima ka suruk; tuldukay u tulu ka dukay (Pentagon) (National: Limsulok o lima na sulok) 6. Hiksahidu u unum ka suruk; updukay (Hexagon) (National: Anisulok) 7. Hiptahidu u pitu ka suruk (Heptagon) 8. Uktihadu u walu ka suruk (Octagon) 9. Nunadu u siyam ka suruk (Nonagon} 10. Dikagun u napulu ka suruk (Decagon) 11. Undecagon u eleven suruk (Undecagon) 12. Dudikagun u twelve suruk (Dodecagon) 13. Tridikagun u thirteen suruk; napugundukay (Tridecagon) (National: Labtatsulok) 3. Three wheels; sadukay (National: triangle) Imahi REDIRECT [[1]] 4. Four wheels; hadukay Imahi REDIRECT [[2]] 5. Lima ang ligid tuldukay (Pambansa: limsulok) Imahi REDIRECT [[3]] 6. Unum an Ligid; updukay (National: nimsulok) Imahi REDIRECT [[4]] 7. Seven Wheels Imahi REDIRECT [[5]] 8. Walu an Ligid Imahi REDIRECT [[6]] 9. Nine wheels Imahi REDIRECT [[7]] 10. Ten wheels Imahi REDIRECT [[8]] 11. Unsi an Ligid Imahi REDIRECT [[9]] 12. Dusi an ligid Imahi REDIRECT [[10]] 13. Trisi an ligid Imahi REDIRECT [[11]] 2D (Two-Dimensional) X-Axis only Y-Axis (Axis) X-plane (English: X-Plane/Axis) flat, tadung tikang wala ngadi tuu or tikang tuu ngadi wala Y-plane (English: Y-Plane/Axis) flat, tadung from top to bottom or from bottom to top

Cartesian: (Cartesian Plane)

If we are the writer, the top line from the center is still in the center and the top line from the center is still the same, the left and bottom are formed. The upper quadrant is equal to the square x and y the square, the lower x is square and y the square, and the upper square is x square and y square, and the upper square is x square and y square. CARTESIAN PLANE Iksampulu: Write two meters above the point (y-axis) and two meters above the point (x-axis) from the point. X: +2 only Y: +2 Write the end of the top line down to the end of the top line. It's a Triyanggulu u tulu ka suruk CONTRIBUTOR JEZALYN GAYONDATU CARTESIAN PLANE Iksampulu: Write two meters above the point (y-axis) and two meters above the point (x-axis) from the point. The end of the top line and the end of the top line cover the point (2,2) they covered. X: +2 only Y: +2 Write three meters above the object (y-axis) and three meters above the object (x-axis) from the object. The end of the top line and the end of the left line mark the point (-3,3) they placed. X: -3 and Y: +3 Write four meters from the x-axis and five meters from the y-axis. The end of the top line and the end of the left line mark the point (-4, -5) they put. X: -4 and Y: -5 Linyahi tikang puntus (2,2) ngadtu puntus (-3.3) ngan tikang (-3,3) ngadtu (-4, -5) ngan tikang (-4, -5) ngadtu balik (2,2) ini in three o'clock. Cubic Triangle. Dida puntus (-3.3) self-esteem is graded. CONTRIBUTOR JEZALYN GAYONDATU CARTESIAN PLANE

An Angle

From the digging of the cutting line. If you write Eskwala it is ninety degrees, or middle, forty-five. A mitru tipa-tuu and a mitru tipa above it is the middle of the ninth degree (90 degrees). If this is your square about one measure {(one time is self) add (one time is self)

INSERT INTO `wiki_article`(`id`, `article_id`, `title`, `article`, `img_url`) VALUES ('NULL()','Kaarangay:Heyometriya','Category: Geometry','If this is your square about one measure {(one time is self) add (one time is self)','')